1/5 Scale Rovan 5B Baja Buggy 29cc Gasoline Ready To Run RC Grey

$579.00

1/5 Scale Rovan 5B Baja Buggy 29cc gasoline ready to run RC delivers strong acceleration, reinforced suspension, stable handling, and dependable large-scale off-road performance in a genuine high-strength Grade A platform.

In stock

Purchase & earn 579 points!
SKU: 5B-GRA-25-29-B-2 Categories: , ,

Description

1/5 Scale Rovan 5B Baja Buggy 29cc Gasoline Overview

The 1/5 Scale Rovan 5B Baja Buggy 29cc Gasoline Ready To Run RC is a large-scale off-road platform built for realism, durability, and dependable performance. This is a genuine, high-strength Grade A model, not a factory second, grade B, or older unit. Rovan designs this buggy around proven Baja architecture to deliver stable handling, strong acceleration, and long service life for both new and experienced drivers. As a result, the grey body provides a clean, aggressive appearance while preserving classic Baja styling.

A 29cc single-cylinder, air-cooled, two-stroke gasoline engine powers the buggy. In addition, a four-point fixed engine mount and a Rofun 997 carburetor deliver consistent throttle response, reliable cold starts, and dependable performance during extended run sessions. Therefore, drivers can enjoy stable operation across varied terrain.

Chassis, Dimensions, and Construction Strength – 1/5 Scale Rovan

The 1/5 Scale Rovan 5B uses a reinforced chassis designed to balance rigidity with controlled flex. The buggy measures approximately 32.2 inches long, 18.9 inches wide, and 10 inches high, with a 22.4-inch wheelbase. Consequently, the wide stance, combined with a 15.6-inch front tread and 15.7-inch rear tread, gives the platform stable footing and predictable handling across rough terrain.

Rear-wheel drive combined with rear-axle braking provides controlled stopping power. Meanwhile, a metal differential manages torque transfer efficiently, while second-generation reinforced front and rear suspension components maintain alignment under load.

Engine and Drive System Performance

At the heart of the Rovan 5B Baja Buggy sits a 29cc air-cooled, two-stroke gasoline engine secured by a four-bolt fixed mount. Accordingly, the rear-wheel-drive layout delivers classic Baja handling characteristics, while an 8,000 RPM clutch manages power delivery smoothly. Furthermore, a controlled exhaust system supports stable operating temperatures and consistent throttle response.

The drivetrain design emphasizes durability. As a result, the buggy sustains high-RPM operation without compromising reliability.

Suspension and Structural Hardware – 1/5 Scale Rovan

Second-generation reinforced front and rear suspension components provide durability and controlled articulation. Shock absorbers with a 0.24-inch stroke manage suspension travel and absorb impacts effectively during off-road use. In addition, second-generation wasteland tires mounted on updated wheel hubs deliver dependable traction across dirt, sand, and loose surfaces.

High-strength nylon and metal suspension elements work together to absorb impact energy. Therefore, the platform maintains precise geometry under aggressive driving.

Electronics and Radio System

The 1/5 Scale Rovan 5B includes a 2.4GHz two-channel radio system designed for stable signal performance and straightforward operation. At the same time, steering control uses a 45KG metal-gear servo housed in a reinforced plastic case, while throttle duties rely on a 15KG all-metal gear servo.

Electronics draw power from a built-in SC6V 2000mAh battery that supports extended run time. As a result, the platform ships ready to run with the radio system and onboard battery pre-installed.

Assembly and Operation – 1/5 Scale Rovan 5B

Out of the Box
The buggy arrives ready to operate once the transmitter batteries are installed and the onboard battery is charged. Therefore, no mechanical assembly is required before the first run.

Crash Durability
Minor crashes rarely cause significant damage when operated responsibly. In practice, the reinforced chassis and suspension absorb typical off-road impacts without compromising alignment.

Fuel Mixing and Break-In Guidance – 1/5 Scale Rovan

Use a 25:1 gasoline-to-oil mixture with quality mineral-based two-cycle oil. By doing so, proper fuel mixing helps minimize carbon buildup and spark plug fouling. Break in the engine through staged running cycles, gradually increasing throttle time while allowing full cool-down periods between runs. Afterward, inspect exhaust fasteners and key hardware.

Radio Setup and Operation

The included two-channel radio provides simple and reliable control. Meanwhile, trim adjustments allow fine tuning of steering response and throttle behavior before driving. Install batteries in the transmitter before operation.

Maintenance Discipline and Hardware Checks

Before each run, inspect all bolts and fasteners and confirm proper torque. Additionally, apply thread locker to clutch and brake hardware after cleaning threads with alcohol to maintain secure fastening during operation.

All items offered by 5TRC are brand new, and approximately 99.9 percent of customers experience no issues. However, large-scale gasoline RC vehicles are powerful hobby machines and require responsible operation. These vehicles are frequently modified by hobbyists and are sold without warranty, express or implied. Consequently, improper use can result in burns, impact injury, or property damage. By purchasing this product, you agree to hold harmless 5TRC from all liability arising from the use or misuse of this product.

Disclaimer and Safety Notice

All items offered by 5TRC are brand new. Approximately 99.9 percent of customers experience no issues. If you are new to the hobby, we strongly recommend reviewing our instructional videos available on YouTube. Rofun and Rovan products sold by 5TRC are sold without warranty, express or implied. Due to the nature of the hobby, these vehicles are frequently customized or modified by end users. Accordingly, all products are sold without guarantees of any kind. These items can cause severe burns from hot exhaust components if handled improperly. Improper use may also result in serious injury or death due to impact to the operator, bystanders, or pets within the operating area. By purchasing this product, you agree to hold harmless 5TRC from any and all liability arising from the use or misuse of this product.

Product images may not accurately represent the exact color of the model purchased and are provided for illustrative purposes to display mechanical features only.

Some of our items may include links to products on Amazon. As an Amazon Associate, I earn from qualifying purchases. This means that if you click on a link to make a purchase, I may receive a small commission at no additional cost to you.

Questions? TextMail: 937-625-0005

5TRC.com, USA’s #1 Rofun Distributor

Plan a good weather day to Race!

-1/5 Scale Rovan-

Additional information

Weight 36 lbs
Dimensions 33 × 19 × 12 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…