Description
-
Overview of the Rovan 1/5 Scale 5B Baja Buggy
The Rovan 1/5 Scale 5B Baja Buggy with camo green body delivers powerful large-scale gasoline performance combined with proven durability and serious off-road capability. From the first pull, this Rovan platform provides strong torque, predictable handling, and reliable operation across dirt, gravel, and open terrain. Because it balances power with control, the Rovan 1/5 Scale 5B remains a strong choice for racing, bashing, and high-performance off-road driving.
These are Genuine High Strength Grade A Rovan 5B models. They are not factory seconds, not downgraded, not knockoffs, and not outdated versions. Every Rovan 1/5 Scale 5B sold through 5TRC uses current-generation components and quality-controlled hardware intended for real-world use.
Size, Scale, and Chassis Design of the Rovan 1/5 Scale 5B
Built to true 1/5 scale proportions, the Rovan 1/5 Scale 5B offers an aggressive stance and excellent stability at speed. The chassis measures approximately 32 1/8 inches long, 18 7/8 inches wide, and 10 inches high, which helps keep the buggy planted during high-speed runs. In addition, the 22 3/8 inch wheelbase and wide front and rear track widths support balanced weight distribution and predictable handling.
Structural Layout and Reinforcement on the 1/5 Scale 5B Platform
The chassis uses second-generation reinforced suspension mounting points designed to absorb impacts instead of transferring shock through rigid components. As a result, the Rovan 1/5 Scale 5B protects critical drivetrain parts during rough driving while maintaining structural integrity. This design improves long-term durability while preserving performance.
Engine and Drivetrain Performance of the Rovan 1/5 Scale 5B
Power comes from a genuine 29cc single-cylinder, air-cooled two-stroke gasoline engine engineered for reliability and strong low-end torque. In stock configuration, this engine delivers 40 MPH plus depending on conditions. Therefore, the Rovan 1/5 Scale 5B provides both speed and control for large-scale off-road operation.
Exhaust, Clutch, and Power Delivery on the Rovan 1/5 Scale 5B
A tuned exhaust pipe improves throttle response while delivering a strong exhaust note. At the same time, an 8,000 RPM clutch manages power delivery smoothly, allowing drivetrain components to handle high loads during acceleration. Because of this combination, power transfers efficiently without unnecessary stress.
Differential and Drive Layout of the 1/5 Scale 5B Buggy
The Rovan 1/5 Scale 5B uses a rear-wheel-drive layout paired with a rear axle brake for controlled stopping power. A metal differential supports consistent power transfer, which helps maintain stability during aggressive throttle input.
Suspension, Wheels, and Handling Characteristics of the Rovan 1/5 Scale 5B
The suspension system plays a critical role in how the Rovan 1/5 Scale 5B performs off-road. Carefully selected components balance durability with predictable handling across changing terrain.
Suspension System and Shock Design on the 1/5 Scale 5B
Second-generation reinforced front and rear suspension arms work with 6mm shocks to absorb impacts effectively. Because the suspension compresses smoothly, the buggy maintains traction over uneven surfaces. In addition, this setup reduces chassis stress during repeated landings and rough driving.
Tires, Hubs, and Ground Contact for the Rovan 5B
Second-generation wasteland tires mounted on reinforced hubs provide consistent grip across dirt and gravel. As a result, the Rovan 1/5 Scale 5B maintains stable tracking during acceleration, braking, and cornering.
Electronics and Control System for the Rovan 1/5 Scale 5B
The electronics package focuses on strength, reliability, and straightforward adjustability to support consistent performance.
Steering, Throttle, and Servo Configuration
This Rovan 1/5 Scale 5B includes a metal gear throttle servo and a metal gear steering servo housed in a durable plastic case. Because of this configuration, steering remains responsive under load while throttle input stays precise during extended run sessions.
Radio System and Adjustments on the Rovan 1/5 Scale 5B
A 2.4G six-channel radio system provides reliable control at long distances. Although the system primarily uses two channels, trim and control extent adjustments allow fine tuning. Therefore, drivers can quickly dial in steering and throttle response before each run.
Battery and Power Support System
A built-in SC6V 2000mAh battery powers onboard electronics. Since the battery charges easily and provides consistent output, downtime between runs remains minimal when proper charging practices are followed.
Assembly and Operation
Out of the Box: Ready to race once the wheels are installed and the car battery has been charged. Minimum 2 hours charge recommended.
Battery Charging
The car features a charging plug and comes with a USB charger. No disassembly required for charging. Allow battery to cool down for 30 minutes after full charge before operation. Remove charger within 30 minutes of full charge (green light) to prolong battery life. Store battery fully charged. Recommended Countdown Timer: https://shorturl.at/FdYdP
Crash Durability
Minor crashes are unlikely to cause significant damage. These Rovan vehicles are tough and designed to handle aggressive off-road driving.
Fuel Mixing Requirements for the Rovan 1/5 Scale 5B
Uses a 25:1 gasoline-to-oil ratio (151.4ml per gallon). Fill the small compartment of the mixing jug to the 25:1 line with oil, then fill the gas compartment to the same line. Use non-synthetic, mineral-based 2-cycle oil. Other suitable brands may also be used.
Radio Setup and Adjustments
This 6-channel radio essentially only uses 2 channels with this car. Trim is on the four adjustments under the cover on the back of the radio. Top left controls steering trim, top right controls throttle and brake trim, bottom left adjusts steering control extents, and bottom right adjusts throttle control extents.
Starting Instructions
Ensure the car and radio are powered on and responding.
Set the choke on the right side of the car (red lever on the carburetor) to the vertical closed position.
Press the primer bulb on top of the carburetor 3 to 4 times, or once fuel is visible.
Gently pull the starter rope until it engages, then pull swiftly. Do not pull the rope out completely; use short quick pulls.
Crank until the engine fires (usually 1 to 3 pulls).
Turn off the choke, then pull the rope 1 or 2 times to start the engine.
Never crank more than 3 times with the choke on.Break-In Process for the Rovan 1/5 Scale 5B
Initial Run: Start by running the car at idle to 1/4 throttle or less for about 5 minutes. Let the engine cool down completely after this run.
Second Run: Repeat the same process less for 10 minutes, then allow it to cool down.
Third Run: You can start pushing it a little harder. Keep in mind that a new engine generates more heat due to increased friction. Run for 8 to 10 minutes, then let it cool.
Subsequent Runs: Continue the process for about five runs, being mindful of any debris that could block cooling. A clean engine runs cooler.
Final Break-In: After these runs, you can run the car at full throttle and let it burn through an entire tank of fuel.
Post-Break-In: Be sure to check and snug up the exhaust pipe after the initial break-in process.
Before each run check bolts throughout the car to ensure they are tight. Lock-tight is recommended on clutch and brake assembly bolts. Clean bolts and holes with alcohol and a q-tip to ensure lock-tight adhesion.
Durability Notes and Material Choice for the Rovan 1/5 Scale 5B
You may feel tempted to upgrade some parts to aluminum. However, aluminum is unforgiving and can break while damaging surrounding components. High strength ABS plastic flexes and bounces back without damage, which is why many plastic components perform better in off-road conditions.
Disclaimer and Safety Notice
All items offered by 5TRC are Brand New. Most customers experience no issues. However, if you are new to the hobby, instructional videos available through YouTube are strongly recommended. Rofun and Rovan products sold by 5TRC are sold without warranty, express or implied. Due to the nature of the hobby, these vehicles are commonly customized and modified by enthusiasts. Accordingly, all products are sold without guarantees of any kind. Please be aware that exhaust components can cause severe burns if handled improperly. Improper use may result in serious injury or death caused by impact to the operator, bystanders, or pets. By purchasing this product, you agree to hold harmless 5TRC from any and all liability for accidents, injuries, or damages resulting from use or misuse.
5TRC.com, USA’s #1 Rovan Distributor
-1/5 Scale 5B-
Reviews
There are no reviews yet.