Description
Rofun 360 Long Body Overview
Next, this buggy keeps maintenance straightforward, so ownership stays simple even after heavy use. Also, the reinforced suspension and anti-roll bars help it stay controlled at speed, so handling feels predictable on rough ground. Moreover, the drivetrain uses proven 360 hardware, so power delivery stays smooth under load. As a result, the Rofun 360 long-body package fits drivers who want a tough 1/5 gas buggy from 5TRC.com.
Specifications
Specification
Item No: Baha360 2024 Version
Material: ABS Plastic+Metal
Function: Move Forward, Turn Left/Right
Power System: 36cc single-cylinder air-cooled two-stroke four-point fixed gasoline engine (Walbro 1107 Carburetor, NGK Spark Plug)
Servo: 18KG full metal gear throttle servo / 60KG metal gear steering (plastic shell)
Remote Control: 2.4Ghz, 6CH
Remote Distance: About 200 Meters
Battery: SC6V, 2000mah (Built-in)
Remote Controller Battery: 4XAA (Not Included)
Tread: front 395mm / rear 400mm
Wheelbase: 570mm
Car Size: 817x480x255mm
Carton Size: 850x470x290mm
pcs/Carton: 1pcs/Carton
G.W/N.W: 18kg / 13kg
Features (Scale 1:5)
36cc Single Cylinder Air-Cooled Two-Stroke Four-Point Fixed Dual-Ring Gasoline Engine (Walbro1107 Carburetor, NGK Spark Plug)
Dimensions (L x W x H): 817x480x255mm
Front Wheelbase: 395mm, Rear Wheelbase: 400mm
Wheelbase: 570mm
Rear-Wheel Drive
Rear-Wheel Axle Brake
18KG All-Metal Gear Throttle Servo
60KG Metal Gear Steering Servo (Plastic Shell)
Dominator Exhaust Pipe
Metal Differential Case
All-Terrain Tires (Treaded Spoke Wheel Hub, Sealed Nuts)
8mm Metal Shock Absorber
SC 6V 2000mAh Battery
6-Channel 2.4G Remote Controller
8000RPM Wear-Resistant Clutch
Generation II Reinforced Front and Rear Suspension
New Ratio Pot
Front and Rear Anti-Roll Bar Set for the Entire Vehicle
9mm Half Shaft (Dog Bone)
Metal Clutch Triangle Bracket
Metal Roll Cage
Symmetrical Steering
Emergency Repair Kit included
CNC Rear Shock Absorber Bracket Crossbar
Packing List
1X RC Car (With Built-in Battery)
1X Transmitter
Assembly and Operation – Rofun 360
Out of the Box: Ready to race once the wheels are installed and the car battery has been charged. In addition, a minimum 2 hours charge is recommended before the first run.
Battery Charging: The car features a charging plug and comes with a USB charger, so no disassembly is required for charging. After charging, allow the battery to cool down for 30 minutes before operation. Also, remove the charger within 30 minutes of full charge (green light) to prolong battery life. Finally, store the battery fully charged when not in use. Recommended Countdown Timer. Countdown Timer
Crash Durability: Minor crashes are unlikely to cause significant damage. Moreover, these cars are tough!
Fuel Mixing – Rofun 360
Uses a 25:1 gasoline-to-oil ratio (151.4ml per gallon). First, fill the small compartment of the mixing jug to the 25:1 line with oil, then fill the gas compartment to the 25:1 line. In addition, use Non-synthetic aka Mineral Based 2 cycle oil for best results. We’ve had great results with Evinrude Johnson Premium TC-W3 Mineral 2 Cycle Oil, UPC 745419363093 Available at Walmart in 1-gallon or 16oz, which minimizes carbon buildup and avoids plug fouling. However, other brands can also be used.
Radio: This 6-channel radio essentially only uses 2 channels with this car. Meanwhile, trim is on the 4 adjustments under the cover on the back of the radio. Top left – steering trim, top right – throttle & brake trim, bottom left – steering control extents, bottom right – throttle control extents.
Starting Instructions
First, ensure the car and radio are powered on and responding.
Set the choke on the right side of the car (red lever on the carburetor) to the vertical closed position.
Next, press the primer bulb on top of the carburetor 3 to 4 times, or once fuel is visible.
Then, gently pull the starter rope until it engages, and pull swiftly using short quick pulls.
After that, crank until the engine fires (usually 1 to 3 pulls).
Finally, turn off the choke, then pull the rope 1 or 2 times to start the engine.
Never crank more than 3 times with the choke on.
Break-In Process – Rofun 360
Initial Run: Start by running the car at idle to 1/4 throttle or less for about 5 minutes. Then, let the engine cool down completely after this run.
Second Run: Next, repeat the same process less for 10 minutes, then allow it to cool down.
Third Run: Afterward, you can start pushing it a little harder, but keep in mind that a new engine generates more heat due to increased friction. Run for 8 to 10 minutes, then let it cool.
Subsequent Runs: Continue the process for about five runs, while staying mindful of any debris that could block cooling. As a result, a clean engine runs cooler.
Final Break-In: After these runs, you can run the car at full throttle and let it burn through an entire tank of fuel.
Post-Break-In: Finally, be sure to check and snug up the exhaust pipe after the initial break-in process.
Before each run check bolts throughout the car to ensure they are tight. In addition, Lock-tight is recommended on clutch and brake assembly bolts. Also, clean bolts and holes with alcohol and a q-tip to ensure Lock-tight adhesion.
You will be tempted to upgrade some of the parts to aluminum. However, aluminum is unforgiving, breaks, and can destroy everything behind it. In contrast, the High Strength ABS Plastic will give and bounce back without damage. As a result, many plastic components are way better.
All items offered by 5TRC are brand new, and approximately 99.9 percent of customers experience no issues. If you are new to the hobby, we strongly recommend reviewing our instructional videos available on YouTube. Rofun and Rovan products sold by 5TRC are sold without warranty, express or implied. Due to the nature of the hobby, these vehicles are frequently customized or modified by end users, and accordingly all products are sold without guarantees of any kind.
These items can cause severe burns from hot exhaust components if handled improperly, and improper use may result in serious injury or death due to impact to the operator, bystanders, or pets within the operating area. By purchasing this product, you agree to hold harmless 5TRC from any and all liability arising from the use or misuse of this product. Product images may not accurately represent the exact color of the model purchased and are provided for illustrative purposes to display mechanical features only. As an Amazon Associate, 5TRC may earn from qualifying purchases.
5TRC.com, USA’s #1 Rofun Distributor
Disclaimer and Safety Notice
All items offered by 5TRC are brand new. Approximately 99.9 percent of customers experience no issues. If you are new to the hobby, we strongly recommend reviewing our instructional videos available on YouTube. Rofun and Rovan products sold by 5TRC are sold without warranty, express or implied. Due to the nature of the hobby, these vehicles are frequently customized or modified by end users. Accordingly, all products are sold without guarantees of any kind. These items can cause severe burns from hot exhaust components if handled improperly. Improper use may also result in serious injury or death due to impact to the operator, bystanders, or pets within the operating area. By purchasing this product, you agree to hold harmless 5TRC from any and all liability arising from the use or misuse of this product.
Product images may not accurately represent the exact color of the model purchased and are provided for illustrative purposes to display mechanical features only.
Some of our items may include links to products on Amazon. As an Amazon Associate, I earn from qualifying purchases. This means that if you click on a link to make a purchase, I may receive a small commission at no additional cost to you.
Questions? TextMail: 937-625-0005
5TRC.com, USA’s #1 Rofun Distributor
Plan a good weather day to Race!
-Rofun 360-
Reviews
There are no reviews yet.