Rofun WLT360 Blue #3 36cc 1/5 Scale 4WD Gas RC Truck

Rofun WLT360 Overview

The Rofun WLT360 Blue #3 is a large 1/5 scale gasoline-powered RC truck engineered for off-road power, durability, and stable handling. Its 36cc two-stroke engine, full-time four-wheel drive, three metal differentials, aluminum chassis, and reinforced suspension create a strong platform for demanding terrain.

This hobby-grade truck arrives nearly ready to run. Install the wheels, charge the onboard battery, install four AA transmitter batteries, add properly mixed gasoline and two-cycle oil, and complete the recommended engine break-in process before full-throttle operation.

Chassis, Drivetrain, and Suspension

The Rofun WLT360 uses a 5mm CNC one-piece 6061-T6 aluminum alloy hard-anodized chassis designed to resist flex under load. Its shaft-driven 4WD system distributes power through front, center, and rear differentials for dependable traction across loose and uneven terrain.

Front CVD half shafts, rear axle-style drive shafts, front and rear anti-roll bars, and 7mm hydraulic shock absorbers help maintain stability during cornering, acceleration, and off-road landings.

Engine and Exhaust

A 36cc single-cylinder, air-cooled, two-stroke gasoline engine provides strong torque and responsive power delivery. The four-point engine mounting system secures the engine firmly to the chassis.

An LT stainless steel performance exhaust supports efficient exhaust flow, while the 8,000 RPM wear-resistant clutch provides controlled engagement. A metal clutch cup support cover reinforces the clutch assembly during demanding operation.

Braking and Differential Control

Dual-disc differential braking provides strong and balanced stopping power. Front, center, and rear differentials distribute torque across the drivetrain, helping the truck maintain traction and control on dirt, gravel, grass, and other off-road surfaces.

Electronics and Radio System

The included 2.4GHz six-channel RC-X6 radio provides reliable control without an LCD screen. Steering and throttle control are handled by heavy-duty 60KG metal-gear servos equipped with CNC metal servo arms.

A rechargeable 6V 4500mAh NiMH onboard battery powers the receiver and servos. A USB charger is included for convenient charging without removing the battery.

Body and Roll Cage

The Blue #3 polycarbonate split body provides a distinctive racing appearance while protecting the internal components. An easy-to-remove full protective roll cage shields the engine, drivetrain, electronics, and fuel system during rollovers and impacts.

Key Features

• Rofun WLT360 1/5 scale gasoline RC truck
• Blue #3 polycarbonate body
• 36cc single-cylinder air-cooled two-stroke engine
• Full-time four-wheel shaft drive
• Front, center, and rear differentials
• Dual-disc braking system
• 5mm CNC 6061-T6 aluminum chassis
• Front CVD drive shafts
• Metal drivetrain components
• 7mm hydraulic shock absorbers
• Front and rear anti-roll bars
• LT stainless steel performance exhaust
• 8,000 RPM wear-resistant clutch
• 800cc fuel tank
• RC-X6 2.4GHz six-channel radio
• 60KG metal-gear steering servo
• 60KG metal-gear throttle and brake servo
• 6V 4500mAh NiMH onboard battery
• Protective roll cage
• Nearly ready-to-run vehicle

Technical Specifications

• 5TRC SKU: WLT360-BLU-203-45-T-4
• Manufacturer Model: Rofun WLT360
• Color: Blue #3
• Scale: 1/5
• Engine: 36cc two-stroke gasoline engine
• Drivetrain: Full-time 4WD
• Differentials: Front, center, and rear
• Fuel Tank Capacity: 800cc
• Approximate Length: 965mm / 38 inches
• Approximate Width: 527mm / 20.7 inches
• Approximate Height: 311mm / 12.2 inches
• Approximate Wheelbase: 615mm / 24.2 inches
• Approximate Track Width: 525mm / 20.7 inches
• Onboard Battery: 6V 4500mAh NiMH
• Fuel Mixture: 25:1 gasoline-to-oil ratio
• Vehicle Setup: Nearly ready to run

Assembly and Operation

Out of the Box

Ready to race once the wheels are installed and the onboard battery has been charged. A minimum two-hour charge is recommended before the first run.

Clear Unpainted Bodies

For unpainted clear bodies, paint the inside using Tamiya polycarbonate PS paint for proper adhesion and durability. For a deeper metalflake appearance, apply a very light coat of clear and then sprinkle a glitter additive, metalflake, or pearl while the paint remains wet. Back it with your preferred colors for a stronger finish. Practice first on a scrap piece of plexiglass.

Battery Charging

The truck features a charging plug and includes a USB charger. No disassembly is required for charging. Allow the battery to cool for 30 minutes after reaching a full charge before operating the truck. Disconnect the charger within 30 minutes after the green full-charge light appears to help prolong battery life. Store the battery fully charged. A recommended countdown timer can help track charging time.

Crash Durability

Minor crashes are unlikely to cause significant damage. These trucks are tough, but responsible operation and routine inspections are still required.

Fuel Mixing

Use a 25:1 gasoline-to-oil ratio, equal to approximately 151.4ml of oil per gallon of gasoline. Fill the small compartment of the supplied mixing jug to the 25:1 line with oil, and then fill the gasoline compartment to its corresponding 25:1 line.

Use non-synthetic, mineral-based two-cycle oil. We have had excellent results with Evinrude Johnson Premium TC-W3 Mineral Two-Cycle Oil, UPC 745419363093. It helps minimize carbon buildup and reduce spark-plug fouling. Other suitable mineral-based two-cycle oils may also be used.

Radio Controls

The six-channel radio primarily uses two channels with this truck. The four adjustments located beneath the rear radio cover control the following functions:

• Top left: Steering trim
• Top right: Throttle and brake trim
• Bottom left: Steering control extent
• Bottom right: Throttle control extent

Starting Instructions

1. Make sure the truck and radio are powered on and responding correctly.
2. Move the red choke lever on the right side of the carburetor into the vertical closed position.
3. Press the primer bulb on top of the carburetor three or four times, or until fuel becomes visible.
4. Gently pull the starter rope until it engages, and then pull it swiftly using short, quick pulls. Never pull the rope completely out.
5. Continue until the engine fires, usually within one to three pulls. Never pull more than three times with the choke closed.
6. Open the choke and pull the starter rope one or two additional times to start the engine.

Important: Never pull the starter more than three times with the choke closed. Refer to this starting guide for additional help.

Break-In Process

Initial Run

Run the truck at idle to no more than one-quarter throttle for approximately five minutes. Allow the engine to cool completely afterward.

Second Run

Repeat the process for approximately ten minutes, and then allow the engine to cool completely.

Third Run

You may begin increasing the throttle slightly. A new engine produces additional heat because of increased internal friction. Run it for eight to ten minutes and allow it to cool completely.

Subsequent Runs

Continue this process for approximately five runs. Check regularly for grass, dirt, or other debris that could restrict engine cooling. A clean engine runs cooler.

Final Break-In

After completing the gradual break-in runs, the truck may be operated at full throttle through a complete tank of fuel.

Post-Break-In Inspection

Check and tighten the exhaust pipe after the initial break-in process.

Before every run, check bolts throughout the truck to make sure they remain tight. Threadlocker is recommended on clutch and brake assembly bolts. Clean the bolts and threaded holes with alcohol and a cotton swab before applying threadlocker to ensure proper adhesion.

Disclaimer and Safety Notice

All items offered by 5TRC are brand new, and approximately 99.9 percent of customers experience no issues. If you are new to the hobby, we strongly recommend reviewing our instructional videos available on YouTube. Rofun and Rovan products sold by 5TRC are sold without warranty, express or implied. Due to the nature of the hobby, these vehicles are frequently customized or modified by end users, and accordingly all products are sold without guarantees of any kind.

These items can cause severe burns from hot exhaust components if handled improperly. Improper use may result in serious injury or death due to impact with the operator, bystanders, or pets within the operating area. By purchasing this product, you agree to hold harmless 5TRC from any liability arising from the use or misuse of this product.

Product images may not accurately represent the exact color of the model purchased and are provided for illustrative purposes to display mechanical features only. Although we do our best to make every listing accurate, AI-assisted content may occasionally include an inaccurate detail or specification. Please contact us with any questions, comments, or inaccuracies you notice.

Some items may include links to products on Amazon. As an Amazon Associate, I earn from qualifying purchases. If you follow a link and make a purchase, I may receive a small commission at no additional cost to you.

Questions? Text or Email: 937-625-0005

5TRC.com, USA’s #1 Rofun Distributor