Rovan 5T Series Green 1/5 Scale 32cc Gasoline Baja Truck

Description

• Overview of the Rovan 5T Baja Truck Platform

  The Rovan 5T Series Green 1/5 scale Baja Truck is a gasoline-powered RC truck engineered for drivers who want raw power, durability, and authentic large-scale performance. Built around a proven 32cc two-stroke engine, this platform delivers strong torque, aggressive acceleration, and reliable operation. As a result, the Rovan 5T stands as a capable off-road truck for both new and experienced RC enthusiasts.

  Size, Scale, and Chassis Design of the Rovan 5T

  Designed to true 1/5 scale proportions, the Rovan 5T offers excellent stability and road presence. The wide stance and balanced chassis layout help maintain control during high-speed runs and rough terrain driving. In addition, the reinforced structure supports repeated off-road use without sacrificing handling consistency.

  Chassis Strength and Structural Components

  The chassis incorporates reinforced mounting points and impact-resistant materials selected for off-road durability. Because these components flex under stress instead of cracking, they help protect drivetrain and suspension parts during crashes. Consequently, the Rovan 5T tolerates hard driving conditions better than rigid aluminum-only designs.

  Engine Performance and Drivetrain of the Rovan 5T

  Power comes from a 32cc gasoline-powered two-stroke engine designed to run on a 25:1 fuel mixture. This engine produces strong low-end torque and dependable throttle response. In combination with a Dominator exhaust and an 8000 RPM clutch, the drivetrain delivers aggressive power while maintaining reliability over long run sessions.

  Rear-Wheel Drive and Braking System

  The Rovan 5T uses a rear-wheel-drive layout with rear axle braking for predictable control. As a result, throttle input feels direct and responsive, especially during acceleration and corner exits. Reinforced drivetrain components further support consistent performance during demanding use.

  Suspension and Durability Features of the Rovan 5T

  Off-road durability defines the Rovan 5T platform. The suspension system uses second-generation reinforced components engineered to absorb impacts while keeping the truck stable.

  Suspension Design and Impact Resistance

  Front and rear anti-roll bars, heavy-duty dog bones, and reinforced suspension arms work together to reduce chassis roll and improve control. In addition, a metal clutch tripod and metal differential case strengthen high-stress areas. Therefore, the truck handles jumps, rough terrain, and minor crashes with confidence.

  Fuel System and Radio Control Setup

  The Rovan 5T uses a straightforward fuel and control system that prioritizes reliability and ease of use.

  Fuel Mixing Requirements

  Use a 25:1 gasoline-to-oil ratio for proper engine lubrication. First, fill the oil section of the mixing jug to the 25:1 line. Then, add gasoline to the same line. Non-synthetic mineral-based 2-cycle oil is recommended to reduce carbon buildup and help prevent spark plug fouling.

  Radio Control Operation

  The included 6-channel RC-X6 radio primarily uses two channels for steering and throttle. Trim adjustments and control extent settings are located under the rear radio cover. As a result, drivers can fine-tune steering response and throttle control with ease.

  Assembly and Operation of the Rovan 5T

  Out of the box, install the wheels, charge the battery, and the truck is ready to run. A minimum two-hour battery charge is recommended before the first drive. After charging, allow the battery to cool for 30 minutes, remove the charger within 30 minutes of the green light, and store the battery fully charged for best longevity.

  Starting Instructions for the Rovan 5T

  Power on the truck and radio.
  Set the choke to the vertical closed position.
  Press the primer bulb three to four times.
  Pull the starter rope with short, firm pulls until the engine fires.
  Open the choke and restart if needed.
  Avoid over-pulling the starter rope.
  Keep debris clear from the engine to maintain proper cooling.

  Break-In Process for the Rovan 5T

  Perform the break-in process over several heat cycles. Start with low throttle operation, then allow the engine to cool completely. Repeat this process while gradually increasing throttle input. After proper break-in, full-speed runs are safe. Before each drive, check all bolts, especially exhaust fasteners, and apply thread locker to critical hardware.

  Safety, Responsibility, and Use Guidelines

  All items sold by 5TRC are brand new. Most users experience no issues; however, this is a high-power machine that requires responsible operation. Engines and exhaust components become extremely hot and can cause burns. Improper use may result in damage or injury. Because hobbyists commonly modify these vehicles, products are sold without warranty. By operating this vehicle, users agree to do so responsibly and hold 5TRC harmless from liability.

  5TRC.com, USA’s #1 Rovan Distributor