Rovan RC 1/5 Scale 5B 29cc Asphalt Racing Buggy Gasoline Venom Red & Black

First, the Rofun Asphalt Racing setup gives you a 1/5 scale 5B style gasoline buggy in a Venom Red and Black look. Also, this listing uses SKU 5B-BLK-47-29-B-2-855122 for matching parts and photos. As a result, you can set it up faster and keep your build consistent.

Rofun Asphalt Racing Overview

This buggy focuses on stability, simple service, and repeatable runs. Additionally, the 5B style layout keeps access straightforward, so you can check bolts, clean the air path, and get back on the road. Therefore, it works well for drivers who want strong performance without complicated setup.

Key Installed Features

• 29cc gasoline power (per title and SKU) with Walbro 1107 carburetor and NGK spark plug (per provided build list).
• Integrated muffler Generation II Dominator exhaust pipe (per provided build list).
• Metal differential and 8000 RPM wear resistant clutch (per provided build list).
• CNC metal shocks listed as 8mm, plus front and rear anti roll bars (per provided build list).
• 6V 4500mAh battery and X4 2.4G LED screen remote controller (per provided build list).
• Metal roll cage, emergency repair kit, and upgraded support components (per provided build list).

Specifications

• Dimensions (L x W x H): 817 x 480 x 255 mm (per provided list).
• Front wheelbase: 395 mm, rear wheelbase: 400 mm (per provided list).
• Wheelbase: 570 mm (per provided list).
• Drive layout: rear wheel drive (per provided list).
• Braking: rear wheel axle brake (per provided list).
• Servos listed: 18KG throttle servo and 60KG steering servo (per provided list).

Assembly and Operation – Rofun Asphalt Racing

Out of the Box: Ready to race once the wheels are installed and the car battery has been charged. Therefore, a minimum 2 hours charge is recommended.

Battery Charging: The car features a charging plug and comes with a USB charger. As a result, no disassembly is required for charging. After a full charge, allow the battery to cool down for 30 minutes before operation. Also, remove the charger within 30 minutes of full charge (green light) to help prolong battery life. Store the battery fully charged. Recommended Countdown Timer.

Crash Durability: Minor crashes are unlikely to cause significant damage. For example, a 20 mph crash into a tree can still result in minor repairs.

Radio: This 6 channel radio essentially only uses 2 channels with this car. Meanwhile, trim is on the 4 adjustments under the cover on the back of the radio. Top left is steering trim. Top right is throttle and brake trim. Bottom left is steering control extents. Bottom right is throttle control extents.

Fuel Mixing – Rofun Asphalt Racing

Use a 25:1 gasoline to oil ratio. First, fill the small compartment of the mixing jug to the 25:1 line with oil. Then, fill the gas compartment to the 25:1 line. Use non-synthetic, mineral-based 2-cycle oil. Also, many other brands can be used.

Starting Instructions

1. Ensure the car and radio are powered on and responding.
2. Set the choke on the right side of the car (red lever on the carburetor) to the vertical closed position.
3. Press the primer bulb on top of the carburetor 3 to 4 times, or once fuel is visible.
4. Gently pull the starter rope until it engages, then pull swiftly. Do not pull the rope out completely. Instead, use short quick pulls.
5. Crank until the engine fires (usually 1 to 3 pulls).
6. Turn off the choke, then pull the rope 1 or 2 times to start the engine.

Important: Never crank more than 3 times with the choke on.

Break In Process – Rofun Asphalt Racing

1. Initial Run: Start by running the car at idle to 1/4 throttle or less for about 5 minutes. Then, let the engine cool down completely after this run.
2. Second Run: Repeat the same process for 10 minutes, then allow it to cool down.
3. Third Run: Increase throttle slightly, and run for 8 to 10 minutes. After that, let it cool down again.
4. Subsequent Runs: Continue the process for about five runs. Also, watch for debris that can block cooling.
5. Final Break In: After these runs, run at full throttle and let it burn through an entire tank of fuel.
6. Post Break In: Finally, check and snug up the exhaust pipe after the initial break in process.
7. Before each run, check bolts throughout the car to ensure they are tight. Additionally, thread locker is recommended on clutch and brake assembly bolts. Clean bolts and holes with alcohol and a cotton swab so thread locker bonds better.

Disclaimer and Safety Notice

All items offered by 5TRC are brand new, and approximately 99.9 percent of customers experience no issues. If you are new to the hobby, we strongly recommend reviewing our instructional videos available on YouTube. Rofun and Rovan products sold by 5TRC are sold without warranty, express or implied. Due to the nature of the hobby, these vehicles are frequently customized or modified by end users, and accordingly all products are sold without guarantees of any kind. These items can cause severe burns from hot exhaust components if handled improperly, and improper use may result in serious injury or death due to impact to the operator, bystanders, or pets within the operating area. By purchasing this product, you agree to hold harmless 5TRC from any and all liability arising from the use or misuse of this product.

Product images may not accurately represent the exact color of the model purchased and are provided for illustrative purposes to display mechanical features only.

Some of our items may include links to products on Amazon. As an Amazon Associate, I earn from qualifying purchases. This means that if you click on a link to make a purchase, I may receive a small commission at no additional cost to you.

Questions? Text or Email: 937-625-0005

5TRC.com, USA’s #1 Rofun Distributor

-Rofun Asphalt Racing-