Rovan RC 1/5 Scale 5B 29cc Baja Buggy Gas with Venom Black Body

Description

• Overview of the Rovan RC 1/5 Scale 5B Buggy Gas Powered Platform

  The Rovan RC 1/5 Scale 5B Buggy Gas Powered with Venom Black body delivers true large-scale gasoline performance for serious off-road enthusiasts. From the first pull, this Rovan platform emphasizes durability, power, and consistency. Moreover, it uses current-generation components and quality-controlled hardware, which improves long-term reliability. As a result, drivers receive a proven Rovan RC Buggy Gas Powered platform built for bashing, racing, and aggressive off-road use.

  In addition, every Rovan RC 1/5 Scale 5B sold by 5TRC is a Genuine High Strength Grade A model. These are not factory seconds, not downgraded versions, and not outdated stock. Instead, they represent current production with reinforced components and refined assembly.

  Engine and Performance of the Rovan RC Buggy Gas Powered

  At the core of this Rovan RC Buggy Gas Powered sits a reliable 29cc single-cylinder, air-cooled two-stroke gasoline engine. This engine delivers strong torque and immediate throttle response. Consequently, stock speeds exceed 40 MPH depending on terrain and conditions. Furthermore, the tuned exhaust pipe improves airflow while producing an aggressive exhaust note.

  Additionally, the buggy uses an 8000 RPM clutch that manages power delivery smoothly. Because of this setup, acceleration stays controlled while still offering strong pull across the powerband. Moreover, the proven 997 carburetor supports engines from 23cc to 32cc platforms, including Zenoah, CY, HPI Baja, RV, and KM models.

  Rovan RC 1/5 Scale 5B Dimensions and Chassis Layout

  The Rovan RC 1/5 Scale 5B Buggy Gas Powered features a wide and stable stance designed for high-speed control. The front width measures 15 1/2 inches, while the rear width extends to 15 3/4 inches. As a result, the buggy maintains balance during cornering and acceleration.

  In addition, the wheelbase measures 22 3/8 inches, which further improves straight-line stability. The overall size comes in at 32 1/8 inches long, 18 7/8 inches wide, and 10 inches high. Combined with an approximate weight of 34 pounds, this layout keeps the chassis planted over rough terrain.

  Suspension and Off-Road Control of the Rovan RC 1/5 Scale 5B

  To handle demanding off-road conditions, the Rovan RC 1/5 Scale 5B Buggy Gas Powered uses second-generation reinforced front and rear suspension components. These parts flex under impact rather than cracking. Therefore, the suspension protects critical drivetrain and chassis components during hard use.

  Additionally, 6mm shocks absorb bumps and landings effectively. The buggy also rides on second-generation wasteland tires mounted on upgraded wheel hubs. As a result, traction remains consistent across dirt, gravel, grass, and mixed surfaces. Moreover, this tire and suspension combination supports both high-speed runs and technical off-road driving.

  Electronics and Radio System in the Rovan RC 1/5 Scale 5B Buggy Gas

  Control and reliability improve further through a 2.4GHz six-channel radio system tested beyond 600 feet. Although the radio requires four AA batteries, it delivers stable signal performance and precise control.

  In addition, the Rovan RC Buggy Gas Powered includes a built-in SC6V 2000mAh battery to power onboard electronics. As a result, run time stays consistent between charges. Furthermore, all-metal throttle and steering gear servos provide durability under load while maintaining responsive steering input.

  Assembly and Operation of the Rovan RC 1/5 Scale 5B

  Out of the Box

  Ready to race once the wheels are installed and the car battery has been charged. Minimum 2 hours charge recommended.

  Battery Charging

  The car features a charging plug and comes with a USB charger. No disassembly required for charging. Allow battery to cool down for 30 minutes after full charge before operation. Remove charger within 30 minutes of full charge (green light) to prolong battery life. Store battery fully charged.

  Crash Durability

  Minor crashes are unlikely to cause significant damage. These cars are tough and built to handle aggressive off-road use.

  Fuel Mixing for the Rovan RC Buggy Gas Powered

  Uses a 25:1 gasoline-to-oil ratio (151.4ml per gallon). Fill the small compartment of the mixing jug to the 25:1 line with oil, then fill the gas compartment to the same line. Use non-synthetic, mineral-based 2 cycle oil. Other suitable brands may also be used.

  Radio

  This 6-channel radio essentially only uses 2 channels with this car. Trim is on the 4 adjustments under the cover on the back of the radio. Top left controls steering trim, top right controls throttle and brake trim, bottom left controls steering extents, and bottom right controls throttle extents.

  Starting Instructions for the Rovan RC Buggy Gas Powered

  Ensure the car and radio are powered on and responding.
  Set the choke on the right side of the car (red lever on the carburetor) to the vertical closed position.
  Press the primer bulb on top of the carburetor 3 to 4 times, or once fuel is visible.
  Gently pull the starter rope until it engages, then pull swiftly. Do not pull the rope out completely; use short quick pulls.
  Crank until the engine fires, usually within 1 to 3 pulls.
  Turn off the choke, then pull the rope 1 or 2 times to start the engine.
  Never crank more than 3 times with the choke on.

  Break-In Process for the Rovan RC 1/5 Scale 5B

  Buggy Gas Initial Run

  Start by running the car at idle to 1/4 throttle or less for about 5 minutes. Then allow the engine to cool completely.

  Second Run

  Repeat the same process for approximately 10 minutes. Afterward, let the engine cool fully before continuing.

  Third Run

  Begin pushing the buggy slightly harder. However, a new engine generates additional heat due to friction. Run for 8 to 10 minutes, then allow a full cool-down.

  Subsequent Runs

  Continue this process for about five runs. Meanwhile, remain mindful of debris that could block airflow. A clean engine runs cooler and more efficiently.

  Buggy Gas Final Break-In

  After completing these cycles, you can run the buggy at full throttle and allow it to burn through an entire tank of fuel.

  Post-Break-In

  Be sure to check and snug up the exhaust pipe after the initial break-in process. In addition, before each run, inspect bolts throughout the car to ensure they remain tight. Lock-tight is recommended on clutch and brake assembly bolts. Clean bolts and holes with alcohol and a Q-tip to ensure proper adhesion.

  Materials and Durability of the Rovan RC 1/5 Scale 5B Buggy

  You may be tempted to upgrade certain components to aluminum. However, aluminum transfers impact force and often damages surrounding parts. In contrast, high-strength ABS plastic flexes and rebounds without damage. Therefore, many factory plastic components perform better in real-world off-road conditions.

  Disclaimer and Safety Notice

  All items offered by 5TRC are Brand New. While most customers experience no issues, new hobbyists should review instructional materials before operating. Rofun and Rovan products sold by 5TRC are sold without warranty, express or implied. Due to the nature of the hobby, vehicles are often modified by enthusiasts and sold without guarantees. Improper use can cause severe burns from exhaust components or serious injury from impacts. By purchasing this product, you agree to hold harmless 5TRC from any and all liability resulting from use or misuse.

  5TRC.com, USA’s #1 Rovan Distributor

  -1/5 Scale 5B-